Pneumatic tracked flatbed hoisting robot - Intelligent Equipment

AS

ransportation and hoisting of small and medium-sized underground equipment, spare parts, and support materials (e.g., single props, anchor bolts).

Component replacement and handling during equipment maintenance at the working face.

Point-to-point material delivery in narrow and undulating roadways.

SA

Suitable for all types of underground coal mine roadways, especially operating areas with limited space and complex road conditions. The load capacity ranges from 3 to 12 tons to meet different load requirements.

IPP

Low efficiency and high safety risks of manual handling → Realize integrated mechanical operation of transportation and hoisting, replace manual handling, and eliminate risks such as heavy object impact and sprain injuries.

Poor roadway passability of traditional vehicles → Adopts a compact crawler chassis with low ground pressure (0.05MPa), high ground clearance (230mm), and strong climbing ability (±20°), which can easily cope with muddy, waterlogged and undulating road surfaces.

Potential safety hazards in the power system → Uses the ubiquitous compressed air in the mine as the power source, no electricity or fuel required, intrinsically explosion-proof, no exhaust pollution, suitable for all hazardous areas.

Unknown equipment status and delayed maintenance → Equipped with an intelligent control system to monitor key parameters such as gas, oil temperature and pressure in real time, alarm for over-limit, and provide 500-hour automatic maintenance reminders to realize preventive maintenance.

TA

Pneumatic explosion-proof power: Directly uses underground air source as power, with convenient, safe and environmentally friendly power acquisition, adapting to high-gas mine environments.

Remote control/manual dual-mode operation: Supports remote control to realize "man-machine separation" safe operation, and can also switch to manual valve groups for emergency or precise operations.

Integrated hoisting function: Standard-equipped with a hydraulic boom with a maximum lifting capacity of 2 tons, slewing angle of ±90°, and telescopic stroke of 680mm, meeting most underground hoisting requirements.

High-passability crawler chassis: Crawler walking driven by hydraulic motor, with slope self-locking function, enabling safe parking and driving on ±20° slopes.

Intelligent safety monitoring: Built-in multi-parameter sensors and sound-light alarm system, conducting all-round monitoring and early warning of vehicle operating status.

PF

✅Material transportation and load-bearing function (load capacity: 3-12t)

✅Slewing, telescopic and hoisting functions of the hydraulic boom

✅Crawler travel and slope adaptive function

✅Remote wireless control and local manual operation function

✅Intelligent vehicle condition monitoring and alarm function

✅Two-speed travel function: low speed (precision) and high speed (site transfer)

TP

Item

单位

MPCQL -3DY

MPCQL -5DY

MPCQL -6DY

MPCQL -7DY

MPCQL -8DY

MPCQL -9DY

MPCQL

-10DY

MPCQL

-11DY

MPCQL -12DY

CM

RLC

t

3

5

6

7

8

9

10

11

12

O(L×W×H)

mm

3500×1100×2100(±50)

CW

kg

2600

GCP

MPa

0.05

SPL

dB(A)

95

SWL

dB(A)

112

TF

kN

25

PH

mm

700±20

GC

mm

230

MSWW

mm

1780

HM

WP

MPa

12

WF

L/min

12

RLiC

kg

2000

BSA

(°)

±90

MLH

mm

2360

TS(Telescopic Stroke)

mm

680

LS

mm/s

100

TM

一

Hydraulic Motor Drive.Crawler Travel

BT

一

Fail-safe Type

TS(Travel Speed)

m/min

30

CC

(°)

±20

TSW

mm

230

WP

MPa

12

WF

L/min

10

HPS

RWP

MPa

13

RWF

L/min

45

ETV

L

75

PM(Pneumatic Motor)

RP

MPa

0.5

AC

m³/min

12